Weider Pro 9735 English Manual - Page 22

Wrap the Press Cable 88 around a V

Page 22 highlights

52. Wrap the Press Cable (88) around a "V" 52 Pulley (81). Attach the "V" Pulley to the upper bracket on the Leg Press Upright (4) with a 3/8" x 2" Bolt (50) and a 3/8" Nylon Jam Nut (43). 50 81 4 CABLE ASSEMBLY 88 43 53. Wrap the Press Cable (88) around a 3 1/2" 53 Pulley (82). Attach the Pulley and a Cable Trap (80) to the indicated hole in the Press Frame (12) with a 3/8" x 3 1/2" Bolt (66), a 3/8" Washer (38) and a 3/8" Nylon Locknut 88 (42). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is between the Pulley and the cross- bar on the Press Frame. 42 80 12 66 38 82 Crossbar 54. Wrap the Press Cable (88) around a "V" Pulley (81). Attach the "V" Pulley to the lower 54 bracket on the Leg Press Upright (4) with a 3/8" x 2" Bolt (50) and a 3/8" Nylon Jam Nut (43). 4 81 88 43 50 55. Wrap the Press Cable (88) around a 3 1/2" Pulley (82). Attach the Pulley and a Cable Trap (80) to the Leg Press Arm (9) with the 3/8" x 4 1/2" Bolt (74). Slide another 3 1/2" Pulley (82) with a Cable Trap (80) onto the 3/8" x 4 1/2" Bolt (74). Hand tighten a 3/8" Nylon Jam Nut (43) onto the Bolt. Do not fully tighten the Nylon Locknut until step 57. 55 88 74 82 80 82 43 80 9 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

52. Wrap the Press Cable (88) around a “V”
Pulley (81). Attach the “V” Pulley to the upper
bracket on the Leg Press Upright (4) with a
3/8” x 2” Bolt (50) and a 3/8” Nylon Jam Nut
(43).
53. Wrap the Press Cable (88) around a 3 1/2”
Pulley (82). Attach the Pulley and a Cable
Trap (80) to the indicated hole in the Press
Frame (12) with a 3/8” x 3 1/2” Bolt (66), a
3/8” Washer (38) and a 3/8” Nylon Locknut
(42).
Be sure that the Cable Trap is turned
to hold the Cable in place and that the
Cable is between the Pulley and the cross-
bar on the Press Frame.
54. Wrap the Press Cable (88) around a “V”
Pulley (81). Attach the “V” Pulley to the lower
bracket on the Leg Press Upright (4) with a
3/8” x 2” Bolt (50) and a 3/8” Nylon Jam Nut
(43).
55. Wrap the Press Cable (88) around a 3 1/2”
Pulley (82). Attach the Pulley and a Cable
Trap (80) to the Leg Press Arm (9) with the
3/8” x 4 1/2” Bolt (74).
Slide another 3 1/2” Pulley (82) with a Cable
Trap (80) onto the 3/8” x 4 1/2” Bolt (74).
Hand tighten a 3/8” Nylon Jam Nut (43) onto
the Bolt.
Do not fully tighten the Nylon
Locknut until step 57.
55
52
53
54
22
CABLE ASSEMBLY
88
81
4
50
43
88
42
80
12
Crossbar
82
38
66
43
82
82
9
80
80
74
88
88
81
4
50
43