Weider Pro 9735 English Manual - Page 24
Seat Assembly
View all Weider Pro 9735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
60. Insert a 1/4" x 2 1/2" Carriage Bolt (60) 60 through the center hole in a Seat Plate (41). Attach the Seat Plate to the Seat (17) with two 1/4" x 3/4" Screws (59). Insert the 1/4" x 2 1/2" Carriage Bolt (60) through the indicated hole in the Front Seat Frame (8). Tighten a 1/4" Nylon Locknut (44) with a 1/4" Washer (37) onto the Carriage Bolt. Attach the other end of the Seat (17) to the Front Seat Frame (8) with a 1/4" Washer (37) and a 1/4" x 2 1/2" Machine Screw (64). 61. Attach the Small Backrest (18) to the Ab 61 Upright (1) with two 1/4" x 3/4" Screws (59). 17 8 41 60 59 37 64 44 1 59 18 SEAT ASSEMBLY 62. Insert a 1/4" x 2 1/2" Carriage Bolt (60) through the center hole in a Seat Plate (41). Attach the Seat Plate to a Seat (17) with two 1/4" x 3/4" Screws (59). Insert the 1/4" x 2 1/2" Carriage Bolt (60) through the indicated hole in the Rear Seat Frame (16). Tighten a 1/4" Nylon Locknut (44) with a 1/4" Washer (37) onto the Carriage Bolt. Attach the other end of the Seat (17) to the Rear Seat Frame (16) with a 1/4" Washer (37) and a 1/4" x 2 1/2" Machine Screw (64). 63. Press 3/4" Round Inner Caps (78) into the ends of each Pad Tube (28). Insert a Pad Tube (28) into the Leg Lever Frame (30). Slide a Foam Pad (29) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (15). Slide a Foam Pad (29) onto each end of the Pad Tube. 62 17 16 41 60 59 64 37 44 63 30 78 29 28 15 29 78 24