Weider Pro 9940 English Manual - Page 13

25. Remove both 3 1/2" Pulleys (24) from the pre-assembled Adjustable Pulley Plates (23). Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the top hole in the two Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Make sure the Cable Trap and the Pulley Plates are oriented as shown. 25 54 26. Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in 26 the direction shown. Attach the Pulley to the Small Pulley Bracket (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50). Make sure the Pulley Bracket is oriented as shown. 27. Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in 27 the direction shown. Attach the Pulley and a Cable Trap (25) to the welded bracket on the Butterfly Base (4) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Make sure the Cable Trap is oriented as shown. 25 24 50 23 74 50 22 57 24 74 74 54 24 25 4 50 13