Weider Sy Pro 6900 Canadian English Manual - Page 11
Attach the Leg Lever 8 to the Front Leg 7
View all Weider Sy Pro 6900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Attach the Top Frame (4) to the Upright (3) with two M10 x 67mm Bolts (71), two M10 Washers 8 (57), and two M10 Locknuts (56). Do not tighten the Locknuts yet. Attach the Top Frame (4) to the Weight Guides (21) with two M10 x 25mm Screws (74). Do not tighten the Screws yet. See steps 3 to 8. Tighten the M10 Locknuts (56) and the M8 Locknuts (58). 71 74 57 4 21 56 56 3 9. Attach the Leg Bumper (60) to the Front Leg (7) with an M4 x 20mm Self-tapping Screw (69) and 9 an M4 Washer (33). Make sure that the end of the Leg Bumper is pointing upward. 7 60 33 69 10. Apply grease to an M10 x 64mm Bolt Set (76). Attach the Leg Lever (8) to the Front Leg (7) with the M10 x 64mm Bolt Set (76). Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg. 10 76 Grease 7 8 76 11