Weider Sy Pro 6900 Canadian English Manual - Page 12
Arm Assembly
View all Weider Sy Pro 6900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Apply grease to an M10 x 77mm Bolt (79). Attach the Pivot Frame (5) to the Top Frame (4) with the M10 x 77mm Bolt (79) and an M10 Locknut (56). Do not overtighten the Locknut; the Pivot Frame must pivot easily. 11 56 5 4 Grease 79 Arm Assembly 12. Attach the two Arm Pins (40) to the Pivot Frame (5) with two M4 x 20mm Self-tapping Screws (69). See the inset drawing. Insert the Arm Pins (40) into the indicated holes in the Upright (3). 12 69 5 40 13. Apply grease to an M10 x 51mm Bolt (66). Attach a Cable Pivot (39) to the Left Arm (10) 13 9 with the M10 x 51mm Bolt (66) and an M10 Locknut (56). Do not overtighten the Locknut; the Cable Pivot must pivot easily. Wet the inside of a Large Foam Pad (42) with soapy water. Slide the Large Foam Pad onto the Left Arm (10). Attach a Handle (11) to the Left Arm (10) with two M10 x 25mm Button Screws (77) and two M10 Washers (57). Assemble the Right Arm (9) in the same way. 12 40 40 3 69 40 66 56 Grease 39 10 11 42 57 77