Weider Sy Pro 6900 Canadian English Manual - Page 6

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the Part List near the end of this manual. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included. 13mm Spacer (52) M10 x 25mm Screw (74) M12 Nut (84) M6 x 32mm Screw (64) M6 x 38mm Screw (95) 11mm Spacer (86) M4 Washer (33) M10 x 25mm Button Screw (77) M10 Locknut (56) M8 x 22mm Shoulder Bolt (65) M8 Locknut (58) M6 Washer (82) M4 x 20mm Self-tapping Screw (69) M8 Washer (59) M6 x 16mm Screw (62) M4.2 x 16mm Self-tapping Screw (49) M10 Washer (57) M4 x 12mm Screw (78) M10 x 46mm Bolt (81) M10 x 51mm Bolt (66) M8 x 63mm Carriage Bolt (87) M10 x 63mm Bolt (75) M8 x 65mm Bolt (68) M10 x 67mm Bolt (71) M10 x 77mm Bolt (79) M10 x 86mm Carriage Bolt (67) Large Washer (85) M10 x 64mm Bolt Set (76) M10 x 130mm Bolt (72) 6