Weider Sy Pro 6900 Canadian English Manual - Page 15

See the CABLE DIAGRAM. Identify the Low, Cable 53.

Get Weider Sy Pro 6900 PDF manuals and user guides View all Weider Sy Pro 6900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

19. Apply grease to an M8 x 22mm Shoulder Bolt (65). Attach the Arm Cable (54) to the right Cable Pivot (39) with the M8 x 22mm Shoulder Bolt (65) and an M8 Locknut (58). 19 Grease 65 54 39 58 20. See the CABLE DIAGRAM. Identify the Low Cable (53). 20 Route the Low Cable (53) through the Leg Lever (8) and the Front Leg (7). Attach a Thick Pulley (48) inside the Leg Lever (8), above the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 13mm Spacers (52), and an M10 Locknut (56). 8 56 57 52 48 53 7 52 57 71 21. Attach a Thick Pulley (48) inside the Front Leg (7), above the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 13mm Spacers (52), and an M10 Locknut (56). 21 56 57 52 7 48 53 52 57 71 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
15
19. Apply grease to an M8 x 22mm Shoulder
Bolt (65).
Attach the Arm Cable (54) to the right Cable
Pivot (39) with the M8 x 22mm Shoulder Bolt
(65) and an M8 Locknut (58).
19
58
65
Grease
20.
See the CABLE DIAGRAM. Identify the Low
Cable (53).
Route the Low Cable (53) through the Leg Lever
(8) and the Front Leg (7).
Attach a Thick Pulley (48) inside the Leg Lever
(8), above the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
13mm Spacers (52), and an M10 Locknut (56).
21. Attach a Thick Pulley (48) inside the Front Leg
(7), above the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
13mm Spacers (52), and an M10 Locknut (56).
20
8
7
53
52
52
57
57
48
71
56
21
56
7
52
52
57
57
71
54
39
48
53