Weslo 605 Instruction Manual - Page 4
Assembly
View all Weslo 605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable spanner , a rubber mallet , and pliers . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. M6 Nylon Locknut (27)-4 M10 Nylon Locknut (33)-6 M10 Split Washer (59)-2 Wave Washer (55)-2 M10 Washer (35)-2 M6 x 12mm Screw (43)-4 M6 x 48mm Flat Head Screw (36)-4 M10 x 25mm Patch Screw (22)-2 M6 x 36mm Button Bolt (50)-4 Pedal Arm Bolt Set (40)-2 M10 x 68mm Button Bolt (48)-2 M10 x 70mm Carriage Bolt (34)-4 1. Identify the Front Stabilizer (10), which is narrower than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front 1 34 Stabilizer to the Frame with two M10 x 70mm Carriage 33 Bolts (34) and two M10 Nylon Locknuts (33). 10 1 33 4