Weslo 605 Instruction Manual - Page 5

M10 x 70mm Carriage Bolts 34 and two M10 Nylon

Page 5 highlights

2. While another person lifts the back of the Frame (1), attach the Rear Stabilizer (28) to the Frame with two 2 M10 x 70mm Carriage Bolts (34) and two M10 Nylon Locknuts (33). 33 1 3. The Console (23) requires four "AA" batteries; alkaline 3 batteries are recommended. Insert four batteries into the battery compartment. Make sure that the batter- ies are oriented as shown by the diagram inside the battery compartment. 23 33 28 34 Batteries Battery Cover 4. While another person holds the Console (23) near the 4 Upright (2), connect the console wire to the Upper Wire (44). Then, insert the wires into the Upright. Attach the Console (23) to the Upright (2) with four M6 x 12mm Screws (43). Be careful to avoid pinching the wires. 44 Turn the Resistance Knob (18) counterclockwise to the lowest setting before going to the next step. 43 23 Console Wire 2 18 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

5
2.
While another person lifts the back of the Frame (1),
attach the Rear Stabilizer (28) to the Frame with two
M10 x 70mm Carriage Bolts (34) and two M10 Nylon
Locknuts (33).
34
28
1
2
33
33
3.
The Console (23) requires four “AA” batteries; alkaline
batteries are recommended. Insert four batteries into
the battery compartment.
Make sure that the batter-
ies are oriented as shown by the diagram inside
the battery compartment.
23
Batteries
Battery
Cover
3
4.
While another person holds the Console (23) near the
Upright (2), connect the console wire to the Upper
Wire (44). Then, insert the wires into the Upright.
Attach the Console (23) to the Upright (2) with four
M6 x 12mm Screws (43).
Be careful to avoid pinch-
ing the wires.
Turn the Resistance Knob (18) counterclockwise to
the lowest setting before going to the next step.
4
23
2
44
Console Wire
43
18