Western Digital My Passport Wireless User Manual - Page 54
Updating Firmware, Updating with Available Firmware - review
View all Western Digital My Passport Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
UPDATING FIRMWARE 112 Updating Firmware This chapter includes the following topics Updating with Available Firmware Performing a Manual Update The Firmware page allows you to automatically or manually check for an update file and then install it. To check automatically and install an available file, the drive must be connected to the Internet. 1. Click Firmware on the navigation bar to display the Firmware page. The current version and last update display in the Version section. WARNING! Do not power off your drive during the installation. When the installation is finished, your drive will automatically reboot. Important: You can only update if the battery is more than 50 percent charged and the charger is plugged in to power. Updating with Available Firmware Note: To look for available updates, the drive must be connected to the Internet via a home network or hotspot connection. You can check for available updates at any time in the Available Updates area. 1. Click Check for Update. 2. Review the Update Firmware screen that displays. 3. If an update is available, click Install and Reboot. When the update is complete, your drive reboots. 49 MY PASSPORT WIRELESS USER MANUAL