Whirlpool WDT730HAM Installation Instructions - Page 6

Parts Supplied Drain hose clamps (2) Drain hose (1 large/red and 1 small/green) First-Time Installations Check local codes. Check existing electrical supply. See the "Electrical Requirements" section. It is recommended that electrical connections be made by a licensed electrical installer. Additional Tools Needed: Small tubing cutter Wire strippers #10 x 1/2" (12.7 mm) Phillips-head screws (2) Undercounter mounting brackets (2) Make sure all these parts are included in the literature package. Door handle (on some models) Optional Accessory Parts Available: Moisture Barrier Tape NOTE: Moisture barrier tape is recommended if installing a dishwasher under a wooden countertop. Side Panel Kit For enclosing the side of the dishwasher when installing it at the end of your cabinetry (Whirlpool part number varies with color.) Call us at our toll-free number or visit our website listed on the Quick Start Guide for optional accessory part information. With 1/2" (12.7 mm), 3/4" (19 mm), and 11/2" (38.1 mm) hole saw bits Additional Parts Needed (not provided): 3/8" (9.5 mm) Compression x 3/4" (19 mm) Hose Fitting with rubber seal and 90° elbow (required to properly connect household water line to the dishwasher) Household Wiring (Metallic) Strain Relief to fit 7/8" (22 mm) hole (required to properly secure household wiring to the dishwasher terminal box) NOTE: Use only: Straight: Whirlpool Part Number 4317824, 90°: Whirlpool Part Number W10278923RP Twist-On Wire Connectors NOTES: � Confirm proper size for connecting your gauge of household wiring to the 16-gauge wiring in the dishwasher. � Use only: Straight: Whirlpool Part Number 4317824, 90°: Whirlpool Part Number W10278923RP 6