Whirlpool WED6600VU Use and Care Manual - Page 17

A. Loosen, these screws., B. Remove, these, A. Door strike, B. Cosmetic

Page 17 highlights

You can change your door swing from a right-side opening to a left-side opening, if desired. 1. Place a towel or soft cloth on top of the dryer or work space to protect the surface, Remove the door assembly 1. Open the dryer door. 2. Remove the bottom screw from each of the 2 hinges that attach the dryer door to the front panel of the dryer. 3. Loosen the top screw from each of the 2 hinges in Step 2. Reverse the strike 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. -A ,B ,A "B A. Loosen these screws. B. Remove these screws. 4. Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel. 5. Remove the 4 plastic plugs located outside the dryer door opening. A. Door strike B. Cosmetic screw 3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed, NOTE: Door strike and plugs must be on the same side of the dryer door opening. Reinstall the door 1. Remove the 4 screws and 2 hinges from the dryer door. 2. Replace the 4 screws in the same holes, 3. Remove the 4 screws from the opposite side of the door. 6= Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4. I I 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

You can change your door swing from
a right-side
opening to a
left-side
opening,
if desired.
1.
Place a towel or soft cloth
on top of the dryer or work
space
to protect the surface,
Remove
the
door
assembly
1.
Open the dryer door.
2.
Remove the bottom
screw from each of the 2 hinges that
attach the dryer door to the front
panel of the dryer.
3.
Loosen the top screw from each of the 2 hinges in Step 2.
-A
,B
,A
"B
A. Loosen
these screws.
B. Remove
these
screws.
4.
Remove the dryer door and the hinges by lifting upward
on
the door. Lay the door on a flat, protected
surface,
with the
inside of the door facing
up. Remove
remaining
2 loose
screws from
dryer front panel.
5.
Remove the 4 plastic
plugs
located
outside
the dryer door
opening.
Reverse
the strike
1.
Remove the door strike from the dryer door opening.
2.
Remove the cosmetic
screw opposite
the door strike.
A. Door strike
B. Cosmetic
screw
3.
Reinstall the door strike and cosmetic
screw on the opposite
side of the dryer door opening from where they were
removed,
NOTE: Door strike and plugs must be on the same side of the
dryer door opening.
Reinstall
the
door
1.
Remove the 4 screws
and 2 hinges from the dryer door.
2.
Replace the 4 screws
in the same holes,
3.
Remove the 4 screws
from the opposite
side of the door.
6=
Install 4 plastic
plugs
into screw
holes in the dryer left where
the hinges were removed
in Step 4.
I
I
17