Whirlpool WED6600VU Use and Care Manual - Page 7

It is your responsibility, INSTRUCTIONS - parts

Page 7 highlights

i^_¸., __ ./ Electrical Shock Hazard Plug into a grounded 4 prong outlet, Failure to do so can result in death or electrical shock. It is your responsibility [] To contact a qualified electrical installer. To be sure that the electrical connection is adequate and in conformance with the Canadian Electrical Code, C22.1 -latest edition and all local codes. A copy of the above codes standard may be obtained from: Canadian Standards Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3 CANADA. To supply the required 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard 14-30R wall receptacle. The cord is 5 ft (1.52 m) in length. Be sure wall receptacle is within reach of dryer's final location. @ [] Do not use an extension cord. If you are using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 3394208. For further information, please reference the service numbers located in the "Assistance or Service" section. GROUNDING INSTRUCTIONS [] For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. SAVE THESE INSTRUCTIONS 4-wire receptacle 14-30R

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

i^_ΒΈ.,
_
_
./
Electrical
Shock
Hazard
Plug into
a
grounded
4
prong outlet,
Failure
to
do
so
can result in death or
electrical
shock.
It is your responsibility
[]
To contact a qualified electrical installer.
To be sure that the electrical
connection
is adequate
and in
conformance
with the Canadian
Electrical
Code, C22.1 -latest
edition
and all local codes. A copy of the above codes
standard
may be obtained
from:
Canadian
Standards
Association,
178 Rexdale
Blvd., Toronto,
ON M9W 1R3
CANADA.
To supply
the required 4 wire, single
phase, 120/240
volt,
60 Hz., AC only electrical
supply
on a separate
30-amp
circuit,
fused on both sides of the line. A time-delay
fuse or
circuit
breaker
is recommended.
Connect
to an individual
branch circuit.
This dryer is equipped
with a CSA International
Certified
Power Cord intended
to be plugged
into a standard
14-30R
wall receptacle.
The cord is 5 ft (1.52 m) in length.
Be sure
wall receptacle
is within
reach of dryer's final location.
@
[]
Do not use an extension
cord.
If you are using a replacement
power
supply
cord, it is
recommended
that you use Power Supply Cord Replacement
Part Number 3394208.
For further
information,
please reference
the service numbers
located
in the "Assistance
or Service"
section.
GROUNDING
INSTRUCTIONS
[] For a grounded,
cord-connected
dryer:
This dryer
must be grounded.
In the event of malfunction
or
breakdown,
grounding
will reduce the risk of electric shock
by providing
a path of least resistance
for electric current.
This dryer
is equipped
with a cord having an equipment-
grounding
conductor
and a grounding
plug. The plug must
be plugged into an appropriate
outlet that is properly
installed and grounded
in accordance
with all local codes
and ordinances.
WARNING:
Improper
connection
of the equipment-
grounding
conductor
can result in a risk of electric shock.
Check with a qualified
electrician
or service
representative
or personnel
if you are in doubt as to whether
the dryer is
properly
grounded.
Do not modify the plug provided
with the
dryer: if it will not fit the outlet, have a proper
outlet installed
by a qualified
electrician.
SAVE
THESE
INSTRUCTIONS
4-wire
receptacle
14-30R