Whirlpool WRF995FIFZ Use & Care Guide - Page 27
Shelves, Bins, and Drawers
View all Whirlpool WRF995FIFZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Shelves, Bins, and Drawers Infinity Slide Shelf Some shelves will tuck away to create room for taller objects. Some models have 2 Infinity slide shelves. 1. To retract the front section of the shelf, push the adjustable portion of the shelf as far back as needed toward the rear of the refrigerator. 2. Extend the front glass and front trim of the shelf by pulling the retracted portion of the shelf outward until it is fully extended. Shelves and Shelf Frames The shelves in your refrigerator are adjustable to meet your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open and save energy. Shelf Height Adjustment Shelf height can be adjusted by changing the adjustable shelf mounts between their vertical and horizontal positions. 1. Carefully lift the shelf off the shelf mounts and turn the flipper to the desired orientation. 2. Repeat for remaining shelf mounts. 3. Apply pressure to the top of the shelf to ensure the shelf is properly seated on the shelf mounts. Small Items Bin A shallow storage compartment with removable lids which slide from side to side is located below and in front of the pantry drawer. NOTE: This compartment is not temperature- or humiditycontrolled, so it is not recommended for storing leafy vegetables. Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. To remove and replace shelves: 1. Make sure adjustable shelf mounts are in the lower position before removing shelves. Also, doors will need to be open at a 90˚ angle. If open wider, it will make it harder to remove the shelves. 2. Remove the middle shelf or top shelf by lifting it up and out of the shelf supports. Then pull the shelf forward and tilt down to a vertical position. Turn the shelf at an angle and pull out of the refrigerator. NOTES: ■■ Will need to remove middle shelf first before removing top shelf. ■■ Infinity slide glass shelves should be pushed back in. When tilted up, make sure glass does not slide to front. 3. Remove the bottom shelf by lifting it up and out of the shelf supports. Then pull the shelf forward and tilt up to a vertical position. Turn the shelf at an angle and pull out of the refrigerator. 4. Replace the middle and top shelves by putting the shelf in the refrigerator at an angle with the shelf front down. Lift the front of the shelf up and in until rear shelf drops into the shelf supports. Lower the front of the shelf and make sure that the shelf is in position. 5. Replace the bottom shelf by putting the shelf in the refrigerator at an angle with the shelf up. Lift the front of the shelf down and in until rear shelf drops into the shelf supports. Lower the front of the shelf and make sure that the shelf is in position. Shelves with under-shelf lighting (on some models) By moving LED lighting to a new spot under the shelves, this leading-edge technology improves interior refrigerator lighting and aids in locating storage items. 27