Whirlpool WRF995FIFZ Use & Care Guide - Page 7

1. Router setup 3. Download app and set up user account Press the WPS button on the router. An indicator light will begin blinking. HELPFUL TIP: The WPS function on your router is active for 2 minutes. Complete the next step within that timeframe or you will need to reinitiate WPS. 2. R efrigerator setup (time-sensitive step) From your mobile device, smartphone, or tablet, go to www.whirlpool.com/connect and follow the instructions to download and install the Whirlpool® App. Once installed, tap the Whirlpool® App icon to open the app. You will be guided through the steps to set up a user account. The app will make sure to get the necessary personal and home information as well as information about your energy company. 4. Register your refrigerator in your user account NOTE: Step 2 will happen after 30 seconds of power-up. Touch and hold CUBED ICE and CRUSHED ICE together for 3 seconds to enable Wi-Fi. The Wi-Fi status indicator on the refrigerator control panel will blink slowly while your refrigerator and router attempt to connect. If the connection is successful, the Wi-Fi status indicator will come on and remain lit. If Your Refrigerator Doesn't Connect: If your refrigerator and router fail to connect after 2 minutes, the Wi-Fi status indicator will blink rapidly for 2 seconds and then turn off. Refer to the "Troubleshooting-Connectivity" section of this Use & Care Guide, check any connection instructions for your specific router, and refer to alternate instructions at www.whirlpool.com/connect or call 1-866-333-4591. NOTE: If this is your first Smart Appliance, you will need to download the Whirlpool® App and create an online user account. If you already have the Whirlpool® App and a user account, please skip ahead to Step 4 "Register your refrigerator in your user account." Registering your refrigerator in your account is a necessary step in order for you to take full advantage of the Smart Features. When prompted by the app, enter the Smart Appliance Identification Number (SAID) (case sensitive) which can be found on a sticker on top of the control housing located on top of the refrigerator. My Smart Appliance ID# is: ■■ Once you've connected your refrigerator to your home Wi-Fi network, it will remain linked even if the power goes out, you move the appliance, or if you put it in storage for a while. ■■ If you replace your wireless router (or get a different Smart Refrigerator), you will need to repeat this connectivity setup process. 7