Xerox 750DP Fiery SI Color Server Administration Guide - Page 107
Configuring the NetWare server, Setting up IPX-Token Ring on the Color Server
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
AA-3 Token Ring Network Option TO CONNECT UTP (UNSHIELDED TWISTED PAIR) CABLE TO THE FIERY SI: • With the Fiery SI turned off, connect RJ-45 cable from the Token Ring MAU to the RJ-45 socket on the Token Ring card. Proceed to page 2-2 for Fiery SI Setup. Before you start Network Setup and Token Ring Setup, review "Configuring the NetWare server" and "Setting up IPX-Token Ring on the Color Server", on page A-3. TO CONNECT STP (SHIELDED TWISTED PAIR) CABLE TO THE FIERY SI: • Or, with the Fiery SI turned off, connect STP cable from the Token Ring MAU to the DB-9 STP connector on the Token Ring card. Proceed to page 2-2 for Fiery SI Setup. Before you start Network Setup and Token Ring Setup, review "Configuring the NetWare server" and "Setting up IPX-Token Ring on the Color Server", below. Configuring the NetWare server Configure a Fiery SI Print Server and a Fiery SI Print Queue on the NetWare server just as described in the chapter about IPX networks ("Configuring a NetWare server for printing" on page 3-4). You can configure up to eight NetWare servers for a total of eight token ring connections to a single Fiery SI. Setting up IPX-Token Ring on the Color Server Token Ring Setup on the Control Panel is described on page 2-19. Since the Token Ring option uses IPX network protocols, setup is very similar to IPX setup for Ethernet, except that you select the Maximum Frame Size before you specify the other IPX options (NetWare File Server, Print Server, and Fiery SI Queue.) NOTE: Connect the token ring cable before doing Fiery SI Network Setup, so that the Token Ring card can configure itself for the correct cable. Setting up NetWare Windows clients Client setup is exactly the same as for IPX clients using Ethernet. In fact, the hardware connection between the client and the NetWare server may be Ethernet cable. See "Setting up NetWare Windows clients for printing" on page 3-13 for details.