Xerox 750DP Fiery SI Color Server Administration Guide - Page 43
Token Ring Setup options, Network Setup options, Enable Token Ring, Yes/No [No]
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
22-19 Network Setup options Network Setup Token Ring Setup Token Ring Setup options This setup can be used only if your system has the Token Ring option installed. Token ring networks used with the Fiery SI use IPX protocols. After enabling token ring and selecting the maximum frame size, you continue with IPX (Novell) Setup. You can set up a maximum of eight token ring connections, but you have to configure a different NetWare file server for each token ring connection. Enable Token Ring Yes/No [No] Select Yes if you use token ring. When you select Yes, the Fiery SI verifies the token ring hardware configuration. Maximum Frame Size (bytes) 632/4216/17690 [4216] Select the maximum size (in bytes) of the data frame along the token ring network. In general, you should leave this at the default 4216. If your network requires it, you can change the value. The Fiery SI configures the token ring hardware, and then displays the IPX (Novell) menu (page 2-14). The options are the same as for IPX on Ethernet networks, except that the NetWare Server Poll Interval does not apply to token ring networks. From the IPX (Novell) menu, choose Add File Server. See page 2-15 for details. When you have connected all the servers you have configured for the token ring network, choose another IPX (Novell) Setup option or choose Exit Network Setup and proceed to Printer Setup.