Xerox 750DP Fiery SI Color Server Administration Guide - Page 69
Setting up a FierySI print queue, AUTOEXEC.NCF, pconsole
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
33-9 Overview of IPX printing to the Fiery SI TO ACTIVATE THE BINDERY CONTEXT: 1. If you cannot reboot the NetWare server at this point, type the set command manually at the server's colon prompt. Use the same command as you entered in the AUTOEXEC.NCF file (in step 7 of the previous procedure). 2. If you can reboot the NetWare server, the set command is loaded automatically. You are ready to set up the Fiery SI print server and print queue. See the next section for details. Setting up a Fiery SI print queue For both NetWare 3.1x and 4.x versions, the NetWare print server and print queue for Fiery SI are created and configured from NetWare Print Console (PCONSOLE), a NetWare utility that is stored in NetWare's PUBLIC directory. TO SET UP A NETWARE SERVER FOR PRINTING TO THE FIERY SI: 1. Log in to the NetWare server as the Supervisor. 2. At the NetWare MS-DOS prompt, type pconsole. NOTE: If you are using NetWare 4.x, PCONSOLE has two modes. Press the F4 key to switch to Bindery mode. If you are using NetWare 4.x, choose Bindery mode for PCONSOLE. The Available Options menu is displayed. 3. Choose Change Current File Server and press Enter.
![](/manual_guide/products/xerox-750dp-fiery-si-color-server-administration-guide-5bc20ba/69.png)