Xerox 750DP Fiery SI Color Server Administration Guide - Page 85
Configuring Windows NT workstations for remote utilities, In Network Setup, under Ethernet Setup
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
33-25 Configuring a Windows NT server to support the Fiery SI Configuring Windows NT workstations for remote utilities To run the Fiery SI utilities, the workstation must be running Windows NT Server or Windows NT Workstation with TCP/IP protocols loaded and bound to the network driver. Follow the steps below to install the utilities on a single workstation and save a configuration file that can be provided to other users on the network. Installing the utility software is also described in Getting Started. TO INSTALL REMOTE UTILITIES AND PREPARE AN INSTALLATION DISK: 1. Perform Fiery SI Setup. 2. In Network Setup, under Ethernet Setup, perform TCP/IP Setup. Enabling TCP/IP automatically enables the communication for the remote Fiery SI utilities. 3. Save changes after Setup. 4. Insert the Fiery SI User Software media in your Windows NT workstation and follow the instructions for installing utilities in Getting Started. 5. When the Installer prompts you to select a network protocol, select TCP/IP. This choice installs the applications in a folder of your choice and automatically places the NET_WSCK.DLL file into the active System folder. NET_WSCK.DLL is the NetLayer dictionary that the utilities need in order to run with TCP/IP on Windows NT. You don't change this file. 6. When you are prompted to find the NET_WSCK.INI file, click Next. The Installer copies the unconfigured file to your Windows directory. NET_WSCK.INI, after you edit the sample file provided, registers the particular Fiery SI, and the copier(s) or printer(s) connected to the Fiery SI. A sample NET_WSCK.INI file for a TCP/IP connection is shown on page 3-26.