Xerox M123 System Administration Guide - Page 82

Workstation Setup, Select [TCP/IP - Subnet Mask], then [Change Settings]. - driver windows 10

Get Xerox M123 - WorkCentre B/W Laser PDF manuals and user guides View all Xerox M123 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

7 TCP/IP (LPD or Port9100) Next, establish TCP/IP. 1. Display the [System Settings] screen. NOTE: For more information about how to display the [System Settings] screen, refer to the Setups chapter of the User Guide. 2. Select [Network Settings]. 3. Select [Protocol Settings]. 4. Select [TCP/IP - Get IP Address] and [Change Settings]. 5. Select a method for establishing an IP address from, [DHCP], [BOOTP], [RARP], [DHCP/Autonet], or [Manual], and then select [Save]. NOTE: Use the DHCP server together with the Windows Internet Name Server (WINS) server. If you selected [Manual] in step 5, then complete steps 6 to 11 to enter [Protocol Settings]. Otherwise, complete step 14. 6. Select [TCP/IP - IP Address], then [Change Settings]. 7. Use the keypad on the screen to enter the IP Address for the machine in the format "xxx.xxx.xxx.xxx". Enter relevant values (0 to 255) into the highlighted field and select [Next]. The next 3 digits are highlighted. When you have finished entering all values, select [Save]. 8. Select [TCP/IP - Subnet Mask], then [Change Settings]. 9. Using the same method as in step 7, enter the Subnet Mask. 10. Select [TCP/IP - Gateway Address], then [Change Settings]. 11. Using the same method as in step 7, enter the Gateway Address. NOTE: If you do not wish to set the Gateway Address, enter "0.0.0.0". 12. Select [TCP/IP - IP Filter], then [Change Settings]. 13. Select [On] to filter access to the machine. NOTE: If you do not wish to use the IP filter feature, select [Off]. NOTE: Use CentreWare Internet Services to register the IP addresses which are not allowed to access the machine. Refer to the CentreWare Internet Services chapter of the User Guide. 14. When you have finished establishing TCP/IP, select [Close] from the [Protocol Settings] screen. Workstation Setup Install print drivers on each client workstation that will be sending print jobs to the machine, and map to the machine as a printer. Refer to the HTML document in CentreWare Utilities CD-ROM or document provided with the optional PostScript Kit. 82 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
7
TCP/IP (LPD or Port9100)
82
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
Next, establish TCP/IP.
1.
Display the [System Settings] screen.
NOTE:
For more information about how to display the [System Settings] screen, refer
to the Setups chapter of the User Guide.
2.
Select [Network Settings].
3.
Select [Protocol Settings].
4.
Select [TCP/IP – Get IP Address] and [Change Settings].
5.
Select a method for establishing an IP address from, [DHCP], [BOOTP], [RARP],
[DHCP/Autonet], or [Manual], and then select [Save].
NOTE:
Use the DHCP server together with the Windows Internet Name Server
(WINS) server.
If you selected [Manual] in step 5, then complete steps 6 to 11 to enter [Protocol
Settings]. Otherwise, complete step 14.
6.
Select [TCP/IP – IP Address], then [Change Settings].
7.
Use the keypad on the screen to enter the IP Address for the machine in the
format “xxx.xxx.xxx.xxx”. Enter relevant values (0 to 255) into the highlighted field
and select [Next]. The next 3 digits are highlighted. When you have finished
entering all values, select [Save].
8.
Select [TCP/IP – Subnet Mask], then [Change Settings].
9.
Using the same method as in step 7, enter the Subnet Mask.
10.
Select [TCP/IP – Gateway Address], then [Change Settings].
11.
Using the same method as in step 7, enter the Gateway Address.
NOTE:
If you do not wish to set the Gateway Address, enter “0.0.0.0”.
12.
Select [TCP/IP - IP Filter], then [Change Settings].
13.
Select [On] to filter access to the machine.
NOTE:
If you do not wish to use the IP filter feature, select [Off].
NOTE:
Use CentreWare Internet Services to register the IP addresses which are not
allowed to access the machine. Refer to the CentreWare Internet Services chapter of
the User Guide.
14.
When you have finished establishing TCP/IP, select [Close] from the [Protocol
Settings] screen.
Workstation Setup
Install print drivers on each client workstation that will be sending print jobs to the
machine, and map to the machine as a printer. Refer to the HTML document in
CentreWare Utilities CD-ROM or document provided with the optional PostScript Kit.