Xerox XDM2525D-WU User Guide - Page 19
Step 4: Connect the USB Cable and Turn on the Power
UPC - 785414106035
View all Xerox XDM2525D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation Step 4: Connect the USB Cable and Turn on the Power The DocuMate 252 scanner connects to any available USB port. Check your computer's manual for USB port locations. NOTE: You can connect the scanner to your computer while the computer is running. You do not have to shut down your computer. 1. Remove any protective tape from the USB cable. 2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Connection to a USB 2.0 High Speed port provides optimum performance, however your scanner will also connect to a USB 1.1 port. USB The USB symbol, as seen in the above diagram, identifies the location of the USB port on your computer. If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. You can also connect the scanner to a USB port on the computer's keyboard if it has one, or to a USB hub. If you use a USB hub, it must have its own power supply already plugged into an electrical outlet. 14 DocuMate 252 Scanner User's Guide