Xerox XDM2525D-WU User Guide - Page 30
Check the Scan Settings Before Scanning, Simplex, Duplex, Refresh, Apply
UPC - 785414106035
View all Xerox XDM2525D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Scanning Check the Scan Settings Before Scanning 1. To check the scan settings before scanning, press, hold down, and then release, either the Simplex or Duplex button. Note: The configurations shown on this example of the One Touch Properties window are for illustration purposes only. The configurations you see on your One Touch Properties window may be different. Press, hold down, and then release either button to see the setting for the selected LED number. The One Touch Properties window opens for you to view and change the settings before scanning. This sample shows the current description of setting 6. The One Touch Button Panel also opens with the description of the selected settings. To Refresh the One Touch 4.0 settings, click the Refresh button. If you make changes in the One Touch Properties window, then click the Apply button, the information in the One Touch panel will update to show the new settings. This number corresponds to the LED on the scanner. The icon indicates the Destination Application for this setting. The current name of the setting. Your document will be scanned with these options for setting Number 6. 2. When you are ready to scan, press either the Simplex or Duplex button, or click OK to close the window then click the button on the One Touch Button Panel. DocuMate 252 Scanner User's Guide 25