Yamaha AV-1 Owner's Manual - Page 13

English Wall/ wall support 65 mm SETTING UP THE SPEAKERS 3 Tapping screw (Available at the hardware store) Min. 12 mm Mounting bracket (type B) Mounting bracket (type C) Screw (type A) 60 mm 3 Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws. * Make sure that the screws are caught by a narrow part of the holes securely. Note If desired, you can hang the speaker on the protruding screws on the wall without using the bracket. WARNING: ● Each speaker weighs 0.7 kg (1 lbs. 9 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. ● Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Longterm use and vibrations may cause them to fall down. ● To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. ● Select a proper position on the wall to mount the speaker and the bracket so that no one will hit his head or face on the sticking part of the bracket, resulting in personal injury. s If you want to mount the speaker on a commercially available speaker stand The provided mounting bracket (type C) which has 1 pair of screw holes (at an interval of 60 mm) are available to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. 1 Attach the bracket to bottom of the speaker by using the provided screw (type A) so that the convex part of the bracket fits in grooved part on bottom of the speaker as figured left. 2 Mount the speaker on the speaker stand by using the screw holes on the bracket. Note The mounting bracket (type C) is provided for each of 5 speakers. E-11