Yamaha AV-1 Owner's Manual - Page 43
RT Radio Text mode, CT Clock Time mode, English, RECEIVING RDS STATIONS, U.K. and Europe models only
View all Yamaha AV-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
English RECEIVING RDS STATIONS RT (Radio Text) mode Information about the program on the station being received is displayed. Information is displayed by a maximum of 64 Roman Alphabets including umlaut sign. * If other characters are used on the RT data, they are displayed with underbars. "RT WAIT" may flash while the unit is receiving the data. * If the RDS station does not employ the RT data service, "NO RT" lights up on the display for about 2 seconds and then returns to frequency display mode. * If the station has PS data, after that, it turns into the PS mode. CT (Clock Time) mode Current time is displayed in the following form. The CT data from the station being received changes every minute. Notes ● RDS data service cannot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text mode) needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY, etc.) are displayed. ● There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the AUTO/MAN'L button so that "AUTO" goes off from the display. Though the reception mode is changed to monaural by this operation, when you change the display to an RDS mode, RDS data may be displayed. ● If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut off suddenly and turn into the frequency display mode. Hour Minute This unit corrects time of the built-in clock by synchronizing it with the CT data. (This function can also be canceled, if so desired. Refer to page 43 for details.) * "CT WAIT" may flash while the unit is receiving the data. If the data is accidentally cut off, "CT WAIT" may flash and then turn into "NO CT". * If the RDS station does not employ the CT data service, "NO CT" lights up on the display for about 2 seconds and then returns to frequency display mode. * If the station has PS data, after that, it turns into the PS mode. E-41