Yamaha AV-1 Owner's Manual - Page 46
Listening To A Source On An External Unit, Operating External Units Connected With This System
View all Yamaha AV-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
LISTENING TO A SOURCE ON AN EXTERNAL UNIT OPERATING EXTERNAL UNITS CONNECTED WITH THIS SYSTEM PRO LOGIC DSP OFF ENHANCED MONO MOVIE ROCK CONCERT VIDEO DISCO HALL STADIUM TRACK PRESET TIMER SLEEP F REP AUTO ST KHz MEMORY MHz PTY HOLD OPEN/CLOSE / CD TUNER TAPE/MD VCR VIDEO 1 VIDEO 2 VOLUME 1, 1 2 To listen to or watch a source on an external unit connected with this system 1 Select a desired input source by pressing the corresponding input selector button. * The name of selected input source is shown on the display. * The names of input selector buttons correspond with the names of terminals to connect with external units on the rear of the main control unit. 2 Play back the source. (For a video source, turn the monitor TV on.) On screen display If the monitor TV connected to this system is turned on, the name of selected input source, the name of selected DSP program, volume level settings, etc. are shown on the monitor screen. TUNER PRESET CD CENTER/REAR /DELAY C/R/D ON/OFF DSP TEST SLEEP LEVEL PROGRAM SUBWOOFER INPUT POWER AMP VOLUME 1, 1 2 To record a source to tape Any input source can be recorded by a tape deck and/or a VCR, MD, etc. connected with this system. 1 Select the source to be recorded by pressing the corresponding input selector button. 2 Play back the source and then turn the volume up to confirm the input source. 3 Begin recording on the tape deck or VCR etc. connected with this system. E-44