Yamaha AV-1 Owner's Manual - Page 52

HOW TO USE THE BUILT-IN TIMER POWER TIMER DISPLAY POWER PRO LOGIC D ENHANCED MONO ROCK CONCERT V DISCO HALL ST PUSH VIDEO 2 MEMORY AUTO/MAN'L PRESET/BAND DISPLAY TIME ADJ TIMER PHONES MINI COMPONENT SYSTEM AV-1 / HOUR / MIN REPEAT / OPEN/CLOSE CD T HOUR MIN POWER TUNER PRESET CD CENTER/REAR /DELAY C/R/D ON/OFF DSP TEST SLEEP LEVEL PROGRAM SUBWOOFER INPUT POWER AMP VOLUME Ž ON TIME/time setting mode ["ON TIME" appears on the display, and soon it is changed to a time setting mode.] Set to the time when you want to begin the timer play by using the HOUR button and the MIN button.  OFF TIME/time setting mode ["OFF TIME" appears on the display, and soon it is changed to a time setting mode.] If necessary, set to the time when you want to finish the timer play (to turn this system into the standby mode) by using the HOUR button and the MIN button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour. Note The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode. (However, it also turns this system into the standby mode.) 3 If you will not use this unit until the timer play begins, turn this system into the standby mode by pressing the POWER switch or the TIMER button. Note If a timer play setting is made and this system is not turned into the standby mode, the source set for the timer play will begin playing when the time comes in place of the source played at that time. To cancel the timer play setting After the timer play is finished, press the DISPLAY button to call the current time. While the current time is displayed, press the TIMER button so that "TIMER" goes out from the display. If it is not canceled, the system will be turned on at the same time every day, so it can be used as an alarm. However, if you are planning to go out at that time, cancel the timer play setting. * Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset. How to make time setting in the ON TIME or OFF TIME mode For the hour: Press the HOUR button to change the hour to a higher value. Press and hold to change continuously. For the minute: Use the MIN button and operate it in the same way as you did to change the hour. E-50