Yamaha AV-1 Owner's Manual - Page 26
Turning The Power To This System On Or In The Standby Mode - av 1 parts
View all Yamaha AV-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TURNING THE POWER TO THIS SYSTEM ON OR IN THE STANDBY MODE TURNING THE POWER TO THIS SYSTEM ON OR IN THE STANDBY MODE PUSH OPEN POWER MINI COMPONENT SYSTEM AV-1 OPEN/CLOSE / CD TUN If the AC supply lead is connected to the AC outlet, this system can be turned on and turned into the standby mode by pressing the POWER switch on the front panel of the main control unit or the POWER switch on the remote control transmitter. • While the power is on, the display on the main control unit shows the name of currently selected input source or other information. In the standby mode, the display shows only the time. Automatic function to turn the system into the standby mode The power of this system will be automatically turned into the standby mode if there is no operation on the control parts of this system, and no playback of CD for about 30 minutes. * This function is not available unless time setting is made on the built-in clock. Direct input source selection When this system is in the standby mode, pressing an input selector button will turn the power on and select the corresponding input source. TUNER PRESET CD CENTER/REAR /DELAY C/R/D ON/OFF DSP TEST SLEEP LEVEL PROGRAM SUBWOOFER INPUT POWER AMP VOLUME Standby mode While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the Standby mode. (In this mode, the display shows only the time.) In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet. E-24