Yamaha CDR-D651 Owner's Manual - Page 13
RECORDING TO A DISC, Basic Recording Operation - recorder
View all Yamaha CDR-D651 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
RECORDING RECORDING TO A DISC 1 NATURAL SOUND CD RECORDER CDR-D651 POWER A DISC 2,4 3 DISPLAY A TEXT/TIME DISPLAY B PHONES LEVEL MIN MAX COPY REC MODE TRACK NO. INPUT DISC A DIGITAL ANALOG MULTI JOG PUSH MODE FINALIZE ERASE DIGITAL REC LEVEL B DISC Recordable ReWritable REC MUTE REC ANALOG REC LEVEL FADE IN/OUT MIN MAX COPY A OPEN/CLOSE B FADE IN/OUT TRACK NO. REC REC MUTE WRITE 2,4 REC MODE FINALIZE ERASE DISPLAY Basic Recording Operation Recording is done on disc tray B of this unit. Disc tray A is used for playback only. Recording operation is described with buttons on this unit and the remote control. These button names are noted in the order of "button name (remote control button name)". I To load a disc 1. Press POWER on the front panel to turn on the power. 2. Press v for disc tray B on your right (OPEN/ CLOSE B on the remote) to open the disc tray. 3. Load a disc to be used for recording, correctly aligned in the recessed area of the disc tray with its recordable side facing down. When loading an 8 cm (3 in.) disc, place it in the inner recessed area of the disc tray. Do not put a normal 12 cm (5 in.) disc on top of an 8 cm disc. 4. Press v (OPEN/CLOSE B on the remote) to close the disc tray. Note • You can also close the disc tray by pressing the front edge of the disc tray gently. When a new disc is loaded in this unit, this unit performs a number of internal operations to determine the format and content of the disc. During this time, "Reading" appears in the display. This process requires approximately 10 seconds to complete for any type of disc. Reading L dB -60 -30 -I0 R -6 -4 -2 -I 0 OVER When a CD-R disc without finalization performed or a CDRW disc is loaded in this unit, OPC (Optimum Power Calibration) is automatically performed to make an optimal recording. OPC optimizes the laser power to the reflectivity of the disc. During OPC, "OPC Adjust" appears in the display. This process requires approximately 15 seconds for a CD-R and 45 seconds for a CD-RW to complete. Note • OPC data is memorized both in this unit and the disc. This unit can memorize the OPC data for up to 24 discs. After 24 discs are reached, the oldest OPC data will be deleted and the newest one will be added. OPC process will not be performed on the disc if its OPC data has been already in this unit's memory. (When Disc Erase is performed on a CD-RW disc, its OPC data will be also erased.) OPC Adjust L dB -60 -30 -I0 R -6 -4 -2 -I 0 OVER After the disc has been read and any necessary internal adjustments have been performed, one of the following displays appears, and normal operation is possible. When a prerecorded audio CD is loaded in this unit 1 : CD L dB -60 -30 -I0 R -6 -4 -2 -I 0 OVER When a new CD-R or CD-RW disc is loaded in this unit 0 : CD-R L dB -60 -30 -I0 R -6 -4 -2 -I 0 OVER E-12