Yamaha CLP-380 Owner's Manual - Page 111
Problem, Cause, Solution, FILE/SONG SETTING] button
View all Yamaha CLP-380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Troubleshooting Problem The USB storage device is not recognized by the instrument. The USB storage device has hung up (stopped). The folder name does not change. Cause Solution The USB storage device may not be recognized by the instrument depending on the timing of the device connection or the setting of the [SELECT] switch. Disconnect the USB storage device and connect it again and select a device using the [SELECT] switch. To view the data of the USB storage device on the CLP display, press the [SONG SELECT] button to engage song selection mode or press the [FILE/SONG SETTING] button to engage file/song setting mode. If you try to engage these modes before connecting the USB storage device, press the [EXIT] button to exit the mode and re-engage the mode. If the device is still not recognized, it may not be supported by Yamaha. Only use devices supported by Yamaha (page 122). The USB storage device is not compatible with the instrument. Only use devices whose compatibility has been confirmed by Yamaha (page 122). The USB storage device does not operate properly. Disconnect the device and connect it to the instrument again. A maximum of 13 characters from a folder name can be displayed. Therefore, if several folders have the same 13 characters at the start of their names, it will appear that they do not change when the C [-][+] buttons are pressed. Shorten long folder names on your computer before using them. Appendix CLP-380 Owner's Manual 111