Yamaha CLP-380 Owner's Manual - Page 89
Setting the chorus on/off, Selecting the DSP type, Setting the speed of the vibraphone, vibrato effect
View all Yamaha CLP-380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Detailed Settings Detailed settings for the voices [VOICE SETTING] Setting the chorus on/off [ChorusOnOff] You can set the [CHORUS] button on or off for each voice. When you select a voice, the chorus on/off setting for the voice automatically changes according to this parameter. TIP Even if this parameter is turned on, the chorus effect is disabled if the ChorusSend parameter is set to 0. See the procedure on page 80. A B Main ChorusOnOff Set?--> Off NO YES C D Setting range: On/Off Selecting the DSP type* [DSP Type (DSP)] You can select other effects (than reverb and chorus). See the procedure on page 80. A B Main DSP Type Set?--> DelayLCR NO YES C D Setting range: DelayLCR Delay applied at left, center, and right positions. DelayLR Delay applied at left and right positions. Echo Echo-like delay CrossDelay Left and right delays are crossed. Symphonic Adds a rich and deep acoustic effect. Rotary Adds the vibrato effect of a rotary speaker. Tremolo The volume level changes in rapid cycles. VibeRotor The vibrato effect of a vibraphone. AutoPan The sound pans left to right and back and forth. Phaser The phase changes periodically, swelling the sound. AutoWah The center frequency of the wah filter changes periodically. SoundBoard ...........Simulates the reverberation of a piano soundboard. Off No effect. Setting the speed of the vibraphone vibrato effect* [VibeRotorSpeed] TERMINOLOGY Rotor= The rotating portion of an electrical device etc. This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. This sets the speed of the vibrato effect that is applied when you have selected Vibraphone and are using the VibeRotor pedal. See the procedure on page 80. A B Main Set?--> VibeRotorSpeed 6 NO YES C D Setting range: 1 - 10 Turning the vibraphone vibrato effect on/off* [VibeRotorOnOff (RotorOnOff)] This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. It turns on/off the vibrato effect that is applied when you use the VibeRotor pedal. See the procedure on page 80. A B Main Set?--> VibeRotorOnOff On NO YES C D Setting range: On/Off CLP-380 Owner's Manual 89