Yamaha CLP-525 Owner's Manual - Page 11

Turning the Power On 1. Connect the plugs of the AC power adaptor in the order shown in the illustration. DC IN jack (page 9) 1-2 AC power adaptor 1-3 1-1 Power cord AC outlet The shape of the plug and outlet differ depending on locale. WARNING • Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. • The AC power adaptor is designed for indoor use only. Do not use in any wet environments. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the power adaptor. 2. Press the [1] (Standby/On) switch to turn the power on. [1] (Standby/On) switch Power indicator Setting Up Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you're ready to turn the power to standby, press the [1] (Standby/On) switch again for a second. The power indicator turns off. CAUTION Even when the [1] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. 11 CLP-525 Owner's Manual