Yamaha CLP-525 Owner's Manual - Page 30

Keyboard Stand Assembly 2-3 Insert the other two tapping screws (4 x 20 mm) into the other two screw holes to secure B. 2-4 Securely tighten the screws on the top of B that were attached in Step 2-1. 3. Secure C. Securely tighten the screws on C that were attached in Step 1-3. 5. Secure A. 5-1 5-2 3 4. Mount A. Be sure to place your hands at least 15 cm away from either end of the main unit when positioning it. Align the screw holes. 5-1 Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front. 5-2 Secure A by tightening the short screws (6 x 16 mm) from the front. 6. Connect the pedal cord and the AC power adaptor. 6-5 6-1 At least 15 cm CAUTION • Be extra careful not to drop the main unit or let your fingers be pinched by it. • Do not hold the main unit in any position other than the position specified above. 6-2 6-3 30 CLP-525 Owner's Manual