Yamaha CLP-525 Owner's Manual - Page 26

Recording Your Performance Changing the Initial Settings of the Recorded Song The settings of the following parameters can be changed after the Record operation is completed. • For individual Parts: Voice, Dual Voices, Reverb Depth • For the entire Song: Tempo, Reverb Type 1. Make the settings of the above parameters. 2. While holding down [REC], press the desired Part button to engage Record Ready mode. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3. Press [REC] and [PLAY] to exit from Record Ready mode. Deleting Recorded Data To delete the entire Song: 1. While holding down [REC], press [DEMO/SONG]. The [+R] and [-L] lamps flash. To exit from this status, press [-L]. 2. Press [+R] to delete the data of the entire Song. The [REC], [PLAY], [+R] and [-L] lamps flash. After the operation is completed, all lamps turn off. To delete a specific Part: 1. While holding down [REC], press [+R] or [-L] (depending on the Part you want to delete) to engage Record Ready mode. The [REC] and the selected Part ([+R] or [-L]) lamps flash. 2. Press [PLAY] to start recording without playing the keyboard. The selected Part ([+R] or [-L]) lamp flashes. 3. Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. 26 CLP-525 Owner's Manual