Yamaha CLP-525 Owner's Manual - Page 14

Using the Pedals, Using the Damper Resonance, Damper Pedal Right, Sostenuto Pedal Center

Page 14 highlights

Playing the Piano Using the Pedals Damper Pedal (Right) Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops (damps) any sustained notes. This pedal also features a "half-pedal" function that creates partial sustain effects, depending on how far down you press the pedal. Sostenuto Pedal (Center) When you press the damper pedal here, this note and the notes you play before you release the pedal sustain longer. Pressing this pedal while holding the notes will sustain the pressed notes (as if the Damper Pedal had been pressed), but all subsequently played notes will not be sustained. This makes it possible to sustain a chord or single low note, for example, while the other notes are played "staccato." Soft Pedal (Left) When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The notes played before this pedal is pressed are not affected. When you select the Jazz Organ Voice, pressing the left pedal switches between fast/slow rotation of the rotary speaker (page 17). NOTE If the damper pedal doesn't work, make sure that the pedal cord is properly plugged into the main unit (page 30). Half-pedal function This function allows you to vary the sustain length depending on how far the pedal is pressed. The farther down you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way or higher to decrease the sustain (murkiness). NOTE While the sostenuto pedal is held, the organ and strings Voices sound continuously without decay after the notes have been released. Using the Damper Resonance The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument. To turn on the Damper Resonance: While holding [PIANO/VOICE], press the G♯2 key. To turn off the Damper Resonance: While holding [PIANO/VOICE], press the G2 key. Default setting: On Lowest key 14 CLP-525 Owner's Manual G2 G♯2 (Off) (On)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Playing the Piano
14
CLP-525 Owner’s Manual
Damper Pedal (Right)
Pressing this pedal will sustain notes longer.
Releasing this pedal immediately stops (damps)
any sustained notes. This pedal also features a
“half-pedal” function that creates partial sustain
effects, depending on how far down you press the
pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will
sustain the pressed notes (as if the Damper Pedal
had been pressed), but all subsequently played
notes will not be sustained. This makes it possible
to sustain a chord or single low note, for example,
while the other notes are played “staccato.”
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the
notes. The notes played before this pedal is pressed are not affected. When you
select the Jazz Organ Voice, pressing the left pedal switches between fast/slow
rotation of the rotary speaker (page 17).
The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you
were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the
instrument.
To turn on the Damper Resonance:
While holding [PIANO/VOICE], press the G
2 key.
To turn off the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
Using the Pedals
When yo
u
press the damper
pedal here, this note and the
notes yo
u
play
b
efore yo
u
release
the pedal s
u
stain longer.
When yo
u
press the sosten
u
to
pedal here
w
hile holding the
note, the note
w
ill s
u
stain as
long as yo
u
hold the pedal.
NOTE
If the damper pedal doesn’t
work, make sure that the pedal
cord is properly plugged into
the main unit (page 30).
Half-pedal function
This function allows you to vary
the sustain length depending
on how far the pedal is
pressed. The farther down you
press the pedal, the more the
sound sustains. For example, if
you press the damper pedal
and all notes you are playing
sound a bit murky and loud
with too much sustain, you can
release the pedal half way or
higher to decrease the sustain
(murkiness).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
Using the Damper Resonance
Default setting:
On
Lo
w
est key
G2
(Off)
G
2
(On)