Yamaha CLP-525 Owner's Manual - Page 12

Auto Power Off, Using Headphones, Disabling Auto Power Off, Using the headphone hanger

Page 12 highlights

Setting Up Auto Power Off To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for approximately 30 minutes. If you do not want to use the Auto Power Off function, disable the function as described below. The setting (disabled or enabled) is retained even if the power is turned off. Disabling Auto Power Off Turn the power of the instrument off. Then, while holding down the lowest key, press the [1] (Standby/On) switch to turn on the power again so that the [REC] indicator flashes three times, indicating that the Auto Power Off function has been disabled. Lowest key You can also disable the Auto Power Off function without turning the power off, by simultaneously holding down [DEMO/SONG] and [PIANO/VOICE] and pressing the A♯5 key. Re-enabling Auto Power Off To enable the Auto Power Off function again, simultaneously hold down [DEMO/SONG] and [PIANO/ VOICE] and press the A5 key. Default setting: Enable A♯5 Highest key A5 Highest key Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, which automatically shuts off the speakers. CAUTION Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss. Using the headphone hanger You can hang the headphones on this instrument. Refer to "Keyboard Stand Assembly" on page 29 for instructions on installing the headphone hanger. NOTICE Do not hang anything other than the headphones on the hanger. Doing so may damage this instrument or the hanger. Bottom surface Standard stereo phone plug PHONES 12 CLP-525 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Setting Up
12
CLP-525 Owner’s Manual
To prevent unnecessary power consumption, this instrument features an Auto
Power Off function that automatically turns the power off if the instrument is
not operated for approximately 30 minutes. If you do not want to use the Auto
Power Off function, disable the function as described below. The setting
(disabled or enabled) is retained even if the power is turned off.
Disabling Auto Power Off
Turn the power of the instrument off. Then, while holding
down the lowest key, press the [
P
] (Standby/On) switch to
turn on the power again so that the [REC] indicator flashes
three times, indicating that the Auto Power Off function
has been disabled.
You can also disable the Auto Power Off function without
turning the power off, by simultaneously holding down
[DEMO/SONG] and [PIANO/VOICE] and pressing the
A
5 key.
Re-enabling Auto Power Off
To enable the Auto Power Off function again,
simultaneously hold down [DEMO/SONG] and [PIANO/
VOICE] and press the A5 key.
Since this instrument is equipped with two [PHONES]
jacks, you can connect two sets of standard stereo
headphones. If you are using only one set of headphones,
insert a plug into either jack, which automatically shuts off
the speakers.
CAUTION
Do not use headphones at a high volume for an extended period of
time; doing so may cause hearing loss.
Using the headphone hanger
You can hang the headphones on this instrument. Refer to
“Keyboard Stand Assembly” on page 29 for instructions on
installing the headphone hanger.
NOTICE
Do not hang anything other than the headphones on the hanger.
Doing so may damage this instrument or the hanger.
Auto Power Off
Default setting:
Enable
Lo
w
est key
Highest key
A
5
Highest key
A5
Using Headphones
PHONES
Standard stereo phone pl
u
g
Bottom s
u
rface