Yamaha D2040 D2040 Owners Manual Image - Page 12
Connections
View all Yamaha D2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
CONNECTIONS 1. 4 Way Set Up (Only separate channels are shown; connect other channels in the same way) Y2 1 DMC1000 D2040 P. AMP Super Low 2 P. AMP Low 3 P. AMP Mid 4 P. AMP High • DMC1000 and D2040 can be also connected with AES/EBU format. • Y2 or AES/EBU stereo signals are transmitted with one cable. 2. 2 Way Set Up (Only separate channels are shown. ) Y2 1 DMC1000 D2040 P. AMP Low 2 P. AMP High 3 P. AMP Low 4 P. AMP High • DMC1000 and D2040 can be connected with AES/EBU format. • Y2 or AES/EBU stereo signals are transmitted with one cable. 3. 3 Way Plus Full Range Set Up (Only separate channels are shown. ) Y2 DMC1000 D2040 P. AMP Low 2 P. AMP Mid 3 P. AMP High 4 P. AMP Full • DMC1000 and D2040 can be also connected with AES/EBU format. • Y2 or AES/EBU stereo signals are transmitted with one cable. 11 4. Full Range Set Up (Only separate channels are shown. ) Y2 1 DMC1000 D2040 P. AMP Full 2 P. AMP Full 3 P. AMP Full 4 P. AMP Full • DMC1000 and D2040 can be also connected with AES/EBU format. • Y2 or AES/EBU stereo signals are transmitted with one cable. • In this case, pay close attention to use of offset delay with common parameters for all 4 channels. If offset delay is to be used, take care to place speakers equidistant with respect to the audience as well as considering other measures to assure proper sound quality. 5. Set Up 1 Using the RS-485 Port (without regard to signal connections) D2040 D2040 D2040 • Either of the RS-485 connectors can be used for connections because each port handles both input and output. Up to 32 units can be daisy chained together. • Be sure to use a digital audio cable of the following specifications for connection: impedance - 90 to 120 52, shield type, equalized transmission cable.