Yamaha DM2000 Studio Manager Owner's Manual - Page 19
Input Channels
![]() |
View all Yamaha DM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Input Channels 16 Input Channels An Input Channel from the Console window is shown below. A SOURCE parameter 1 This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that B appears. C D B Bus Out routing buttons These buttons are used to route the Input Channel's signal to 5 one or more of the Bus Outs. 6 C STEREO button 7 This button is used to route the Input Channel's signal to the 8 Stereo Out. 9 J D DIRECT button K This button turns on and off the Input Channel's routing to its L Direct Out. M E Direct Out destination This parameter is used to select a Direct Out destination. To N select a destination, click the parameter and choose from the list O that appears. P F PHASE button Q This button is used to reverse the signal phase of the channel. G INSERT button This button is used to turn on and off the Input Channel's Insert. R H GATE button This button is used to turn on and off the Input Channel's Gate. I Gate open & closed indicators These indicators display whether the Gate is open (green) or S closed (red), when the Gate is turned on. T J Gate Threshold display This display shows the Threshold setting of the Gate. The value can be set by dragging. VU W K COMP button X This button is used to turn on and off the Input Channel's Com- Y pressor. Z L Compressor curve display This display shows the Compressor's curve. M EQ button a This button is used to turn on and off the Input Channel's 4-band Parametric Equalizer. N EQ curve display This display shows the Equalizer's curve, which can be set by dragging. b O DELAY button This button is used to turn on and off the Input Channel's Delay function. Studio Manager-Owner's Manual
![](/manual_guide/products/yamaha-dm2000-studio-manager-owners-manual-7bc6019/19.png)