Yamaha DM2000 Studio Manager Owner's Manual - Page 20

17 Chapter 2-Console Window P Delay Time This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging. Q Channel number Displays the Channel number of the channel. R AUX section These controls are used to set the levels of the 12 Aux Sends. To turn an Aux Send on or off, click its number. To set an Aux Send level, drag the end of the bar next to the Aux Send's number or click a point along the length of the bar. The table below shows how the Input Channel's Aux Send controls appear depending on their status. See page 23 for information on how to switch Aux Sends to pre-fader or post-fader positions. Aux Send status Bar appearance on Input Channel Either on or off but no level set Off, pre-fader Dark blue bar Green bar outline displays level On, pre-fader Off, post-fader Green bar displays level Orange bar outline displays level On, post-fader Orange bar displays level S Pan/Aux Send This parameter shows either the stereo or surround pan position and, during Aux Send setting, the parameter shows the Aux Send level in dB. T Pan control This control is used to set the Input Channel's stereo or surround pan position. When the PAN CONTROL in the Master Section is set to "STEREO," the Pan control appears as a rotary control, and when set to "SURR," the control appears as dot on a pan graph. The surround pan position can be set by dragging the dot. U LFE control This control is used to set the surround LFE Channel level. It appears when the PAN CONTROL in the Master Section is set to "SURR." To set the LFE level, drag the end of its bar or click a point along the length of the bar. V AUTO button This button is not used in Version 1.0 of Studio Manager for DM2000. W SELECT button This button is used to select the Input Channel. X SOLO button This button solos the Input Channel and is colored orange when the channel is soloed. Y ON button This button turns the Input Channel on and off. It is colored orange when the channel is turned on. Z Short Channel name This is the channel's Short Channel name, which can be edited. To edit the name, click it and type. a Channel Fader This control is used to set the level of the Input Channel. b Channel Meter This meter displays the signal level of the Input Channel. Studio Manager-Owner's Manual