Yamaha DM2000 Studio Manager Owner's Manual - Page 28

25 Chapter 3-Selected Channel Window D Bus Out Routing/Pan/Level section This section contains the controls for the currently selected Bus Out's routing, pan, and level functions. The TO STEREO button turns on and off the Bus to Stereo routing, and the rotary controls are used to set the Bus to Stereo level and Pan position. The SOLO button is used to solo the Bus Out, the ON button to turn the Bus Out on and off, and the Channel Fader to set the Bus Out level. The AUTO button is not used in Version 1.0 of Studio Manager for DM2000. E COMPRESSOR section This section contains the controls and display graph for the currently selected Bus Out's Compressor and is identical to the Compressor section of the Input Channels. See page 23. F INSERT section This section contains the parameters for the currently selected Bus Out's Insert. The INSERT button turns the Insert on and off. The OUT and IN parameters are used to select the channel's Insert Out and Insert In, and the POSITION parameter is used to specify the Insert's position in the channel's signal path. G FADER GROUP/MUTE GROUP section This section contains the buttons for assigning the currently selected Bus Out to the Fader Groups and Mute Groups. Click the Heart Mark to pair the channel with its adjacent channel. Aux Sends The Selected Channel window for the Aux Sends is shown below. 1 2 3 4 5 6 7 A CHANNEL SELECT section Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by clicking the left and right Channel Select buttons. This section also displays Studio Manager-Owner's Manual