Yamaha DTX-PROX DTX-PRO DTX-PROX Reference Manual - Page 122
Fader Select CUSTM, Configuring Custom Settings
View all Yamaha DTX-PROX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
PROX Fader Select CUSTM Configuring Custom Settings The settings shown below can be customized. (Master EQ, Phones EQ gain, volume of each click timings, and send settings on MIDI control change) 1. Use the fader select knob to select a parameter. Screen Parameter MEQ Gain Settings -12 - 0 - +12 Description Use this parameter to boost or cut the center-frequency levels of the Lo, LoMid, Mid, HiMid, and Hi MEQ Freq settings. MEQ parameters other than Gain can be adjusted in MENU/Master EQ. HPEQ Gain -12.0 - 0.0 - +12.0 Use this parameter to boost or cut the center-frequency levels of the Lo, LoMid, HiMid, and Hi HPEQ Freq settings. HPEQ parameters other than Gain can be adjusted in MENU/Phones EQ. CLICK Vol ([F1]) 0-10 Adjusts the volumes of each click timing. Switches between Human voice 1 and 2. These two use different counting methods. MIDI CC SETTING ([F1]) CC No. CC01-CC95 MinValue MaxValue MIDI Ch 0-127 0-127 1-16 Set the MIDI Control Change to send with the LED rotary faders. Use this parameter to set the Control Change number. Sets the minimum value. Sets the maximum value. Sets the MIDI channel to output to. 2. Use the LED rotary faders [1] to [7] to adjust the settings. Use [1] to [5] for MEQ, [1] to [4] for HPEQ, [1] to [6] for ClickVol and [1] to [7] for MIDI CC. DTX-PRO DTX-PROX Reference Manual 122