Yamaha DTX-PROX DTX-PRO DTX-PROX Reference Manual - Page 128
Matching Click to the Tempo of the Audio File, Offset Time, Wav&Click Sync
View all Yamaha DTX-PROX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
LIVE SET Mode 3. To register the next step, first return to the LIVE SET EDIT screen or STEP EDIT screen, and then use the [-][+] controllers to select a step. LIVE SET EDIT screen STEP EDIT screen or 4. Once all steps have been registered, save the Live Set. See "Saving a Customized Live Set under a New Name." (page 130) Matching Click to the Tempo of the Audio File If the song in the audio file has a fixed tempo, you can sync the click to the audio file. 1. Select the audio file. 2. Find the click tempo that matches to the song tempo. 3. Check the time length from the beginning of the audio file to the first beat of the song and set the time as the Offset Time. 3-1. With the audio file selected, move the cursor to Offset Time. 3-2. Press the "PLAY" button ([F3]) to start the playback of the audio file, and then press the "STOP" button ([F3]) at the first beat of the song. The elapsed time for the audio playback will appear on the upper right of the screen. 3-3. Set the time shown here as the Offset Time. Note that the time shown on the screen may be different from the actual time of the first beat, due to a slight delay caused by pressing the button. Setting the Offset Time to around 100 ms shorter than the time shown on the screen makes it easier to set the offset timing. You can also use a DAW software, such as Cubase AI that comes included with the PRO series module, to open the audio file and zoom in for a closer look at the wave to find the starting time of the first beat. 4. Set Wav&Click Sync to "on," and then press "PLAY" ([F3]). The click will start after the set Offset Time. If the Offset Time is set correctly, the click will start at the same time as the first beat of the song. If the click and the first beat are still off, readjust the Offset Time. To add a pre-count before a song playback starts, set the desired number of measures to PreCount. To stop the click after the pre-count, set CountOff to "stop." DTX-PRO DTX-PROX Reference Manual 128