Yamaha EZ-TP Owner's Manual - Page 23

Play With Song Accompaniment Play Mode 2 - Press the Valves Indicated By the Guide Lamps In this mode you can play the melody by playing the appropriate valve fingerings in time with the song. There is no need to sing the melody in this mode. The guide lamps will show you which valves to press to finger each note. 1 Select a song and press the PLAY MODE [2] button. Press the valves indicated by the guide lamps that light red. Song playback will stop and wait until you play the correct fingering for each note. Press the PLAY MODE [2] button when you want to stop song playback. Play Mode 3 - Sing and Use the Valves Play by singing and using the fingerings learned in Play Mode 2. 1 Select a song and press the PLAY MODE [3] button. The accompaniment will play through without stopping. Sing the melody while playing the correct fingerings for each note. Press the PLAY MODE [3] button when you want to stop song playback. ● Changing the Guide Lamp Mode The guide lamps normally light during song playback. With the default "Aut" setting the guide lamps flash to indicate melody note timing in Play Mode 1, while indicating valve fingerings in all other modes. the guide lamp mode can be changed as follows: 1 Press the button so that the lower indicator lights. 2 Press the [TEMPO] button - the button will light. 3 Press and hold the [TEMPO] button, use the [-]/[+] buttons to select the desired guide lamp mode: Aut ..... The guide lamps indicate melody note timing in Play Mode 1, and valve fingering in all other modes. F .......... The guide lamps always indicate valve fingering. t .......... The guide lamps always indicate melody note timing. b .......... The guide lamps flash to indicate the tempo and beat of the song. L .......... Used for precise adjustment of the MIC VOL control (page 15). oFF ..... The guide lamps will not light. EZ-TP Owner's Manual 23 21