Yamaha HTR-5940 Owners Manual - Page 42
Enjoying pure hi-fi stereo sound, Displaying the input source information, DIRECT STEREO, STRAIGHT
View all Yamaha HTR-5940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USING OTHER FEATURES Enjoying pure hi-fi stereo sound The "DIRECT STEREO" mode allows sources to bypass the decoders and DSP processors of this unit so that you can enjoy pure hi-fi sound from 2-channel PCM and analog sources. Set the component selector switch to AMP and then press DIRECT ST. on the remote control to select "DIRECT STEREO". AMP SOURCE TV DIRECT ST. 8 Displaying the input source information You can display the format, sampling frequency, channel, bit rate, and flag data of the current input signal. 1 Press one of the input selector buttons to select the desired input source. CD DVD MD CD-R CBL DTV SLEEP XM TUNER MULTI CH IN V-AUX DVR DIRECT STEREO Notes • To avoid unexpected noise, do not play CDs encoded in DTS when the "DIRECT STEREO" mode is selected. • When multi-channel signals (Dolby Digital and DTS) are input, this unit automatically switches to the corresponding analog input. When "DTS" is selected as the input mode (see page 33), no sound will be output. • No sound will be output from the subwoofer. • "TONE CONTROL" (see page 31) and "SOUND MENU" (see page 78) settings (except for speaker level settings) are not effective. • The front panel display automatically dims. y You can also select the "DIRECT STEREO" mode by pressing the PROGRAM l / h buttons on the front panel repeatedly. 2 Set the component selector switch to AMP and then press STRAIGHT on the remote control to select "STRAIGHT". " AMP SOURCE STRAIGHT ENT. TV EFFECT STRAIGHT 3 Press u / d to display the information about the input signal. PRESET/CH A-E/CAT. ENTER A-E/CAT. 38