Yamaha HTR-5940 Owners Manual - Page 83

Speaker level, LFE/Bass out, Crossover, Subwoofer phase

Page 83 highlights

LFE/Bass out BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR, FRNT, BOTH • Select "SWFR" (subwoofer) if you connected a subwoofer. The LFE signals as well as the lowfrequency signals of other speakers set to "SML" (or "SMALL") or to "NONE" are directed to the subwoofer. • Select "FRNT" (front) if you did not connect a subwoofer. The LFE signals, the low-frequency signals of the front left and right channels, and the lowfrequency signals of other speakers set to "SML" or to "NONE" are all directed to the front left and right speakers regardless of the "FRONT" setting (see page 78). • Select "BOTH" (both) if you connected a subwoofer. The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to "SML" or to "NONE" are directed to the subwoofer. The lowfrequency signals of the front left and right channels are directed to the front left and right speakers regardless of the "FRONT" setting (see page 78). Crossover CROSSOVER Use this feature to select a crossover frequency of all the speakers set to "SML" (or "SMALL") or to "NONE" in "SPEAKER SET" (see page 78). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to "LRG" (or "LARGE") in "SPEAKER SET" (see page 78). Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz Subwoofer phase SWFR PHASE Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear. Choices: NRM, REV • Select "NRM" if you do not want to reverse the phase of your subwoofer. • Select "REV" to reverse the phase of your subwoofer. SET MENU ■ Speaker level B) SP LEVEL Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in "SPEAKER SET" (see page 78). The selected speaker outputs test tone and the speaker indicator of the speaker flashes. Control range: -10.0 to +10.0 dB Control step: 1.0 dB Initial setting: 0 dB The following is an example where "FL" is selected to adjust the balance of the front left speaker. DVR SP A FL V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM VOLUME dB ----||---- L CR SL SR Flashes • Select "FL" to adjust the balance of the front left speaker. • Select "FR" to adjust the balance of the front right speaker. • Select "C" to adjust the balance of the center speaker. • Select "SL" to adjust the balance of the surround left speaker. • Select "SR" to adjust the balance of the surround right speaker. • Select "SB" to adjust the balance of the surround back speaker. • Select "SWFR" to adjust the balance of the subwoofer. Note "C", "SL", "SR", "SB" and "SWFR" cannot be adjusted if "CENTER" (see page 78), "SUR. LR" (see page 78), "SUR. B" (see page 78) and "BASS OUT" (see page 79) are set to "NONE" respectively. ADVANCED OPERATION 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111

79
SET MENU
ADVANCED
OPERATION
LFE/Bass out
BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices: SWFR, FRNT,
BOTH
Select “SWFR” (subwoofer) if you connected a
subwoofer. The LFE signals as well as the low-
frequency signals of other speakers set to “SML”
(or “SMALL”) or to “NONE” are directed to the
subwoofer.
Select “FRNT” (front) if you did not connect a
subwoofer. The LFE signals, the low-frequency signals
of the front left and right channels, and the low-
frequency signals of other speakers set to “SML” or to
“NONE” are all directed to the front left and right
speakers regardless of the “FRONT” setting (see
page 78).
Select “BOTH” (both) if you connected a subwoofer.
The low-frequency signals of any source are output
from the subwoofer. The LFE signals as well as the
low-frequency signals of other speakers set to “SML”
or to “NONE” are directed to the subwoofer. The low-
frequency signals of the front left and right channels
are directed to the front left and right speakers
regardless of the “FRONT” setting (see page 78).
Crossover
CROSSOVER
Use this feature to select a crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see page 78). All frequencies below
the selected frequency will be sent to the subwoofer or to
the speakers set to “LRG” (or “LARGE”) in “SPEAKER
SET” (see page 78).
Choices: 40Hz, 60Hz,
80Hz
, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
Subwoofer phase
SWFR PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices:
NRM
, REV
Select “NRM” if you do not want to reverse the phase
of your subwoofer.
Select “REV” to reverse the phase of your subwoofer.
Speaker level
B) SP LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 78). The
selected speaker outputs test tone and the speaker
indicator of the speaker flashes.
Control range: –10.0 to +10.0 dB
Control step: 1.0 dB
Initial setting: 0 dB
The following is an example where “FL” is selected to
adjust the balance of the front left speaker.
Select “FL” to adjust the balance of the front left
speaker.
Select “FR” to adjust the balance of the front right
speaker.
Select “C” to adjust the balance of the center speaker.
Select “SL” to adjust the balance of the surround left
speaker.
Select “SR” to adjust the balance of the surround right
speaker.
Select “SB” to adjust the balance of the surround back
speaker.
Select “SWFR” to adjust the balance of the subwoofer.
“C”, “SL”, “SR”, “SB” and “SWFR” cannot be adjusted if
“CENTER” (see page 78), “SUR. LR” (see page 78), “SUR. B”
(see page 78) and “BASS OUT” (see page 79) are set to “NONE”
respectively.
Note
DVR
p
DVD
CD
XM
V-AUX
DTV/CBL
MD/CD-R
TUNER
VOLUME
A
SP
dB
L
CR
SL
SR
FL ----||----
Flashes