Yamaha MT400 Owner's Manual - Page 30

29 Effects processor Input Output Insert cable 1 INSERT I/O MIC/LINE INPUT 2 INSERT I/O 3 STEREO INPUT 4 5L 6R 7L 8R AUX SEND 1 2 GAIN LINE HIGH -12 MID -12 LOW -12 AUX 1 0 1 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 2 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 3 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 4 5L-6R 7L-8R LEVEL LEVEL MIC 0 10 0 10 +12 MULTITRACK CASSETTE RECORDER +12 +6 +3 0 -5 -10 REC 1 2 3 4 L R TAPE SPEED CONTROL REC SELECT +12 PITCH 1 2 3 4 OFF OFF OFF OFF L R L R 4.8/ 9.5 10 - + +6 POWER +3 0 -5 -10 METER SELECT 4TR STEREO Effects processor connection with an insert cable Once connected, operation is the same as normal recording and mixdown. Effects are applied to the MIC/LINE INPUT 1 or 2 signal with the [INPUT-FLIP] switch set to "MIC/LINE ( )". If the [INPUT-FLIP] switch is set to "TAPE ( )", effects are applied to the Track 1 or 2 signal. Using AUX SENDs The AUX SENDs allow you to connect external effects processors and apply effects to MT400 signals. This means that input channels on the MT400 can share the same effects processors. For example, delay and reverb type effects with different intensity settings for each channel (or track) can be applied to several sounds when mixing and recording them onto two tracks or at mixdown. To use external effects processors with the AUX SENDs jacks, connect AUX SENDs 1 and 2 to the inputs of effects processors and connect the outputs of effects processors to STEREO INPUTs 5L/6R or 7L/8R. Effects processor 1 Effects processor 2 Outputs Input Outputs Input 1 INSERT I/O MIC/LINE INPUT 2 INSERT I/O 3 STEREO INPUT 4 5L 6R 7L 8R AUX SEND 1 2 GAIN LINE HIGH -12 MID -12 LOW -12 AUX 1 0 1 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 2 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 3 GAIN MIC LINE HIGH +12 -12 MID +12 -12 LOW +12 -12 AUX 1 10 0 4 5L-6R 7L-8R LEVEL LEVEL MIC 0 10 0 10 +12 MULTITRACK CASSETTE RECORDER +12 +6 +3 0 -5 -10 REC 1 2 3 4 L R TAPE SPEED CONTROL REC SELECT +12 PITCH 1 2 3 4 OFF OFF OFF OFF L R L R 4.8/ 9.5 10 - + +6 POWER +3 0 -5 -10 METER SELECT 4TR STEREO Connecting external effects processors to AUX SENDs -Owner's Manual