Yamaha MTX MTX/MRX system Firmware Update Guide - Page 12

The firmware update is now complete., If Requires Initialization appears in the Status field - mtx5 d manual

Get Yamaha MTX PDF manuals and user guides View all Yamaha MTX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

9. If "Requires Initialization" appears in the Status field, initialize the specified device. To start initialization, set DIP switch 7 to the down position and DIP switch 8 to the up position (on the XMV, Device setup DIP switches 7 and 8), then restart the device. For more information, refer to the User's Manual for the corresponding device. When initializing Dante devices (MTX5-D, MRX7-D and Dante model of XMV), ensure that all other Dante devices on the network are disconnected or powered off. Otherwise initialization could take longer than necessary. The firmware update is now complete. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
12
9.
If "Requires Initialization" appears in the Status field, initialize the specified device.
To start initialization, set DIP switch 7 to the down position and DIP switch 8 to the up position (on the XMV,
Device setup DIP switches 7 and 8), then restart the device. For more information, refer to the User's Manual for
the corresponding device.
When initializing Dante devices (MTX5-D, MRX7-D and Dante model of XMV), ensure that all other Dante
devices on the network are disconnected or powered off. Otherwise initialization could take longer than necessary.
The firmware update is now complete.