Yamaha MTX MTX/MRX system Firmware Update Guide - Page 14
Now recovery and firmware update are completed., Click [Start].
View all Yamaha MTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10. Check the detected device. 11. Click [Start]. A pop-up is displayed confirming that you wish to proceed. 12. Click [OK] to start the recovery. Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the device(s) are recovered. 13. Exit the Dante Firmware Update Manager, and wait for two minutes before turning off the power to the device. 14. The correct Dante firmware now needs to be loaded. Follow steps 2 through 11 described in "Updating the Dante firmware." Now recovery and firmware update are completed. Manual Development Group © 2014 Yamaha Corporation Published 02/2017 YJ-C0 14
14
10.
Check the detected device.
11.
Click [Start].
A pop-up is displayed confirming that you wish to proceed.
12.
Click [OK] to start the recovery.
Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the
device(s) are recovered.
13.
Exit the Dante Firmware Update Manager, and wait for two minutes before turning off the power to
the device.
14.
The correct Dante firmware now needs to be loaded.
Follow steps 2 through 11 described in "
Updating the Dante firmware
."
Now recovery and firmware update are completed.
Manual Development Group
© 2014 Yamaha Corporation
Published 02/2017 YJ-C0