Yamaha MU100R MU100R SOUND LIST - Page 36
MU100 native parameter change 1, MU100 native parameter change 2
![]() |
View all Yamaha MU100R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2.1.3.1 XG System On This system exclusive message causes the MU100R to function as an "XG"-compatible tone generator. 11110000 F0H 01000011 43H 0001nnnn 1NH 01001100 4CH 00000000 00H 00000000 00H 01111110 7EH 00000000 00H 11110111 F7H Exclusive status YAMAHA ID N:device Number Model ID Address High Address Mid Address Low Data End of Exclusive When On is received, the SOUND MODULE MODE will be set to XG, and all MIDI messages defined by XG such as NRPN or bank select etc. can be received. Since approximately 50[ms] are required in order to execute this message, please allow an appropriate interval before transmitting the next message. 2.1.3.2 XG System parameter change This message sets the XG SYSTEM block (refer to tables , ). 2.1.3.3 Multi Effect1 parameter change This message sets the MULTI EFFECT1 block (refer to tables , ). 2.1.3.4 Multi EQ parameter change This message sets the MULTI EQ block (refer to tables , ). 2.1.3.5 Multi Effect2 parameter change This message sets the MULTI EFFECT2 block (refer to tables , ). 2.1.3.6 Unique Effect parameter change This messages set the Unique Effect block (refer to tables , ). 2.1.3.7 Display parameter change This message sets the DISPLAY block (refer to tables , ). 2.1.3.8 Multi Part parameter change This message sets the MULTI PART block (refer to tables , ). 2.1.3.9 AD Part parameter change This message sets the AD PART block (refer to tables , ). MIDI MIDI data format 2.1.3.10 AD System parameter change This message sets the AD SYSTEM block (refer to tables , ). 2.1.3.11 Drums Setup parameter change This message sets the DRUMS SETUP block (refer to tables , ). 2.1.3.12 Part Assign parameter change This messages set the Part Assign block (refer to tables , ). 2.1.4 MU100 native parameter change (1) This message sets parameters unique to the MU100. Each message sets a single parameter. As indicated below, the message format is in common with the MU50, MU80, and MU90. 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0001nnnn 1NH N:Device Number 01001001 49H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 0vvvvvvv VVH Data : : 11110111 F7H End of Exclusive For parameters whose Data Size is 2 or 4, the number of data bytes indicated by Size are transmitted. 2.1.4.1 MU100 System parameter change This message sets the SYSTEM block (refer to tables , ). 2.1.4.2 Remote Switch This message sets the REMOTE SWITCH (refer to tables , ). 2.1.5 MU100 native parameter change (2) This message sets parameters which are unique to the MU100. Each message modifies a single parameter. The format of this message is the same as for the MU90, as shown below. 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0001nnnn 1NH N:Device Number 01011001 59H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 0vvvvvvv VVH Data : : 11110111 F7H End of Exclusive 35
![](/manual_guide/products/yamaha-mu100r-mu100r-sound-list-fac075e/36.png)