Yamaha MU100R MU100R SOUND LIST - Page 37
Bulk dump
![]() |
View all Yamaha MU100R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
MIDI data format For parameters whose Data Size is 2 or 4, the number of data bytes indicated by Size are transmitted. 2.1.5.1 Current Performance parameter change This message sets the CURRENT PERFORMANCE block (refer to tables , ). 2.1.6 VL70-m native parameter changes 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0001nnnn 1NH N:Device Number 01010111 57H Model ID 0ggggggg GGH Address High 0mmmmmmm MMH Address Mid 0lllllll LLH Address Low 0vvvvvvv VVH Data : : 11110111 F7H End of Exclusive 2.1.6.1 VL System parameter change (refer to table ). 2.1.6.2 VL Current Voice/Common Misc parameter change (refer to table ). 2.1.6.3 VL Part parameter change (refer to table ). 2.1.6.4 VL Current Voice/Element parameter change (refer to table ). 2.1.7 Other parameter changes 2.1.7.1 Master tuning This message simultaneously modifies the tuning of all channels. 11110000 F0H Exclusive status 01000011 43H YAMAHA ID 0001nnnn 1NH N:device Number 00100111 27H Model ID 00110000 30H Address High 00000000 00H Address Mid 00000000 00H Address Low 0000mmmm 0MH Master Tune MSB 0000llll 0LH Master Tune LSB 0xxxxxxx XXH don't care 11110111 F7H End of Exclusive Normally, the XG SYSTEM message MASTER TUNE should be used (refer to table ). 2.2 Bulk dump This device uses the following bulk dump messages. [XG BULK DUMP] 1) XG System bulk dump 2) System Information bulk dump 3) Multi Effect1 bulk dump 4) Multi EQ bulk dump 5) Multi Effect2 bulk dump 6) Multi Part bulk dump 7) AD Part bulk dump 8) Drums Setup bulk dump [MU100 NATIVE BULK DUMP 1] 1) MU100 System bulk dump 2) MU80, MU50 Internal Performance bulk dump [MU100 NATIVE BULK DUMP 2] 1) MU100 Internal Performance bulk dump [VL70-m NATIVE BULK DUMP] 1) VL System bulk dump 2) VL Current Voice/Common Misc bulk dump 3) VL Part bulk dump 4) VL Current Voice/Element bulk dump 5) VL Custom Voice bulk dump 6) VL Internal Voice bulk dump 2.2.1 XG bulk dump This message sets XG-related parameters. Unlike parameter change messages, a single message can modify multiple parameters. The message format is as follows. 11110000 F0H 01000011 43H 0000nnnn 0NH 01001100 4CH 0sssssss SSH 0ttttttt TTH 0ggggggg GGH 0mmmmmmm MMH 0lllllll LLH 0vvvvvvv VVH : : 0kkkkkkk KKH 11110111 F7H Exclusive status YAMAHA ID N:Device Number Model ID ByteCountMSB ByteCountLSB Address High Address Mid Address Low Data Check-sum End of Exclusive Address and Byte Count are given in tables 1-n. Byte Count is indicated by the total size of the Data in tables 1-n. Bulk dump and dump request messages are received when the beginning of the block is specified as the 'Address'. 'Block' indicates the unit of the data string that is indicated in tables 1-n as 'Total size'. Check sum is the value that produces a lower 7 bits of 0 when the Start Address, Byte Count, Data, and the Checksum itself are added. 2.2.1.1 XG System bulk dump This message sets the XG SYSTEM block (refer to tables , ). 36 MIDI
![](/manual_guide/products/yamaha-mu100r-mu100r-sound-list-fac075e/37.png)