Yamaha MW10C MW8CX/MW10C Owners Manual - Page 26

Reference Specifications ■ Analog Input Specifications Input Connectors Gain Input Appropriate Impedance Impedance CH INPUT MIC (CHs 1, 2) -60 dB -16 dB 3 kΩ 50-600 Ω Mics CH INPUT LINE (CHs 1, 2) -34 dB +10 dB 10 kΩ 600 Ω Lines ST CH MIC INPUT (CHs 3/4, 5/6) -60 dB -16 dB 3 kΩ 50-600 Ω Mics ST CH LINE INPUT (CHs 3/4, 5/6) -34 dB +10 dB 10 kΩ 600 Ω Lines ST CH INPUT (CH 7/8 (CHs 7/8, - 9/10)*) 10 kΩ 600 Ω Lines CH INSERT IN (CHs 1, 2) - 10 kΩ 600 Ω Lines RETURN (L, R) - 10 kΩ 600 Ω Lines 2TR IN (L, R) - 10 kΩ 600 Ω Lines Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms Sensitivity ** -72 dBu (0.195 mV) -28 dBu (30.8 mV) -46 dBu (3.88 mV) - 2 dBu (0.615 V) -72 dBu (0.195 mV) -28 dBu (30.8 mV) -46 dBu (3.88 mV) - 2 dBu (0.615 V) -22 dBu (61.5 mV) -12 dBu (195 mV) - 8 dBu (308 mV) -22 dBV (79.4 mV) Nominal Level -60 dBu (0.775 mV) -16 dBu (123 mV) -34 dBu (15.5 mV) +10 dBu (2.45 V) -60 dBu (0.775 mV) -16 dBu (123 mV) -34 dBu (15.5 mV) +10 dBu (2.45 V) -10 dBu (245 mV) 0 dBu (0.775 V) +4 dBu (1.23 V) -10 dBV (0.316 V) Max. before Clipping -40 dBu (7.75 mV) +4 dBu (1.23V) -14 dBu (155 mV) +30 dBu (24.5 V) -40 dBu (7.75 mV) -6 dBu (389 mV) -14 dBu (155 mV) +30 dBu (24.5V) +10 dBu (2.45 V) +20 dBu (7.75 V) +24 dBu (12.3 V) +10 dBV (3.16 V) Connector Specifications XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) TRS phone jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) Phone jack (unbalanced) Phone jack (unbalanced) RCA pin jack TRS phone jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) Phone jack (unbalanced) RCA pin jack ** Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum level. (All level controls are at their maximum position.) ■ Analog Output Specifications Output Connectors STEREO OUT (L, R) EFFECT SEND (AUX SEND*) CH INSERT OUT (CHs 1, 2) REC OUT (L, R) MONITOR OUT (L, R) PHONES OUT Output Impedance 150 Ω 150 Ω 75 Ω 600 Ω 150 Ω 100 Ω Appropriate Impedance 10 kΩ Lines Nominal Level +4 dBu (1.23 V) 10 kΩ Lines +4 dBu (1.23 V) 10 kΩ Lines 10 kΩ Lines 10 kΩ Lines 40 Ω Phones 0 dBu (0.775 V) -10 dBV (0.316 V) +4 dBu (1.23 V) 3 mW Max. before clipping +20 dBu (7.75 V) +20 dBu (7.75 V) +20 dBu (7.75 V) +10 dBV (3.16 V) +20 dBu (7.75 V) 75 mW Connector Specifications TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack (unbalanced [Tip = OUT, Ring = IN, Sleeve = GND]) RCA Pin jack TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * The MW8CX feature is described first, followed by the MW10C feature in brackets: MW8CX (MW10C) ■ Digital Input/Output Specifications Connector USB Format USB Audio 1.1 Data Length 16 bit Connector Specification USB B type 92 MW8CX/MW10C Owner's Manual